Getting Started with Decawave DWM1001-DEV

[leapslabs]

Hi guys,

see also this post, it might help you:

Rasberry Pi and dwm1001 UART communication

Hi Cindy, are you using the Raspberry image from PANS? If you runs default PANS image, it will try to configure the module to Bridge mode. If you want to take control over the DWM1001-DEV, then you need to stop DWM Proxy, DWM Daemon and then DWM Kernel: sudo /etc/init.d/dwm1001 stop sudo /etc/init.d/dwm1001-proxy stop sudo rmmod dwm Then you can do what is needed via the /dev/serial0. E.g. minicom -D /dev/serial0 -b 115200 Cheers, TDK

Cheers,
TDK