Hi,
I am trying to connect the tag device this command
Blockquote
minicom -D /dev/ttyACM0 -b 115200
without the Decawave provided VM. But It’s failed to connect and this is performed several times.
Any advice.
Thanks
Hi,
I am trying to connect the tag device this command
Blockquote
minicom -D /dev/ttyACM0 -b 115200
without the Decawave provided VM. But It’s failed to connect and this is performed several times.
Any advice.
Thanks
a little recomendation is use Teraterm to see which COM/Serial/ACM number will use the node, hope i can help you.
Best,
Franco
Hi Franco,
I am using ubuntu PC and the corresponded port id is /dev/ttyACM0. I have also used the provided VM but It’s failed to connect to the serial port.
Thanks in advance
Best
Ibrahim
The issue is solved, I forgot to press enter twice, now everything is going well.
Thanks
1/ Perform the following:
➢ minicom -D /dev/ttyACM0
2/ “Enter” key twice within one second to enter UART shell mode.
“dwm>” should present in the terminal when this is all done.
Then you can configure,initiator,anchor or tag