MDEK1001 multifloor installation

[leapslabs]

Hi Izak,

set the Z axis as described by Jon. That should be correct.

Regarding the network functionality on the multiple floors, see my response in this post, perhaps it can help you:

Common UWB anchors as reference for tags in multiple floors

Hi Sandeep, in PANS it is not possible to assign a Tag to multiple networks, so you understood it correctly. I don’t propose each floor with different PANID. If you want to cover 3 floors then you could do a test first with 3 smaller installations in each of the floor. E.g. 1 Tag, 3 groups of 3-4 Anchors. All nodes to have the same PANID. Place each of the anchor group on each of the floor if possible at similar X/Y location. These scenario might happen depends on the signal propagation in th…

Please let us know if it works for you and good luck!

Thanks,
Cheers, TDK