Simple telemetry between couple of objects

[ZANONE]

Hi
We are studying a solution for distance detection from two objects. We want to use one initiator anchor and one tag. More couples of initiator-tag can be presente at the same time in the same place.
We are thinking to use the DWM1001 (MDEK1001).
Is it possible to have the distance from the anchor?
What about the co-existence of several initiators in the same place?
Thank you.

[leapslabs]

Hi Filippo,

it should be possible. Set different PANID for each of the pair.
See also this post:

Common UWB anchors as reference for tags in multiple floors

Hello, Deployment scenario 1:- Multiple floors in a building with enclosed walls on all the four sides and with ceiling and concrete roof. In this case, the tags in floor ‘x’ will only see the anchors in floor ‘x’ and tags in floor ‘y’ will only see the anchors in floor ‘y’. In this case, we can have two networks with different or same PANIDs and should not be a problem in location determination. Deployment scenario 2:- In warehouses for example, even though there is a metal ceiling and floori…

Several initiators with different PANIDs should become synchronized and all nodes should run without collision. When the pairs roams (get out of range of the other pairs and then return back in-range) at a certain time some collision might happen. In a such case the nodes should resolve the collision and nodes should become synchronous again.

Cheers,
TDK