I think DWM3000 uses UWB CH5 (6.5GHz) and CH9 (8GHz).
In my country (Japan), UWB channel 5 is not legally allowed to be used.
So I would like to limit the channels used and use the DWM3000, is that possible?
Yes. The chip only supports one channel at a time, you must configure it to select the channel you wish to use.
If you only want to use channel 9 then configure it to use channel 9 on power up and it’ll never use channel 5.
Thank you for your reply.
It was helpful.
Thank you very much.