Fetch bridge data on uart

[leapslabs]

Hi Asmita,

@Asmita

Now , I want to send data from bridge to UART.

Do you mean to send data using MQTT to the bridge so the data could be received on the module’s Shell or UART API? If so then you can publish the downlink data to the bridge and use the documented API to observe/receive the data. Please refer to the API documentation.

This topic can help you with the downlink data publication

Downlink data from bridge to tag

Hi Tofu, If you wish to do that, you need to write to the mqtt topic corresponding to the node. The idea is to communicate with nodes through MQTT, but not with low levels API. Thanks Yves

Cheers,
TDK