have a DWM1001 module only that is being powered by 3.3V DC. How do I get it running and loading new firmware?
Can you provide more details.
What is the marking on the module you have?
Is it programmed with the PANS software/HEX file?
It is a Decawave Model DWM1001C module soldered on a custom board
See here - DWM1001 Now FCC, IC and CE Certified!
If these are DWM1001C, FCC/CE marked then they are blank, meaning no PANS software is programmed.
Ok, a few questions.
1). How do you get the firmware on?
2). What would the proper part be to order that has the PANS on?
Hi Mike,
-
Your custom board needs SWD programmer to program the module.
If you use DWM1001-DEV then is has J-Link so you can use the Segger software to load the binary into it. Another option is to use OpenOCD. -
You can use the part you have just reflash the PANS binary into it. See this link: https://mailchi.mp/2e29a06be75f/728wi51rzu?e=[UNIQID]
Cheers,
TDK