Please could someone tell me if there is a way to adjust the sensitivity for a tag’s stationary detection?
I want a tag to be stationary but on a slight movement (by a few centimetres) come out of stationary mode. At the moment, the tag only comes out of stationary mode when there is a relatively large movement (for my needs anyway). I need this to be more sensitive than it is at present and come out of stationary mode on a smaller accelerated movement (or displacement) of the tag.
Please let me know if this is possible to do and how I would go about it?
My setup is with anchors tags and multiple gateways. Transport of the tracked hardware is so smooth that the accelerometers don’t detect movement even with the higher sensitivity.